How to Iron On Your Skull & Crossbones

1. Cut excess margin from the Skull & Crossbones so that all that remains is the outline of the skull with 4 bones coming out at each corner.
2. Peel of the paper backing from the image being CAREFUL not to tear the image. Start peeling at the skull area and work out.
3. Preheat iron to hottest cotton setting. NO STEAM!
4. Lay out the tee shirt on an ironing board or other firm area that can accept heat. Iron out any wrinkles in the area to receive the Skull & Crossbones transfer and let cool. Do Not Iron Over Any Print!
5. Place the Skull & Crossbones FACE UP (image facing you) above the (:30 Pin Club) printing. Leave space between the two.
6. Place the transparent tissue ironing paper over the Skull & Crossbones so that it is completely covered.
7. Place iron over the paper and hold using light pressure (iron weight) for :30 seconds. Do Not Move The Iron Back and Forth.
8. Remove the iron and let cool for about 2-3 minutes.
9. Remove and SAVE (for future use) the tissue paper.
10. If the Skull & Crossbones is not completely in place repeat step 6 concentrating on the area that is not applied.
11. DON'T IRON OVER ANY OF THE S&C AFTER THEY ARE APPLIED. THE HEAT WILL MELT THEM AND RUIN THE SHIRT.
12. Pin all of your opponents in :30 or less or more to get more skull and crossbones!